AXYON® 25W Qi2.2 Magnetic Wireless Charger for iPhone 18 Pro, 17 & 16 – 1m Braided USB-C Cable
Snap it on. Walk away. Come back charged. The AXYON® 25W Qi2.2 Magnetic Wireless Charger locks onto the back of your iPhone with a firm magnetic snap and charges at up to 25W, with no fiddling to line it up and no plug to find in the dark. It's officially Qi2.2 certified by the Wireless Power Consortium. A 1m braided USB-C cable is built in, and the charging electronics sit in the USB-C connector instead of the pad, so the pad that touches your phone carries less heat. Available in Black or White, as a single or a 2-pack. Backed by a 12-month AXYON warranty with support from Sydney.
Qi2.2 Certified 25W. Here's What That Means for Your iPhone
Qi2.2 is the latest version of the global wireless charging standard, and this charger is officially certified to it at 25W (Qi ID 26279). That means it has passed the Wireless Power Consortium's own tests for power, safety and compatibility, not just a factory's claims. The iPhone 16, iPhone 17 and iPhone 18 Pro series can draw that full 25W when the charger is connected to a USB-C PD wall adapter of 30W or more. Older iPhone models, from the iPhone 12 onwards, still charge magnetically at the highest wireless speed they support. The charger works that speed out automatically, so there's nothing to set up.
We spell this out because many wireless chargers print "25W" on the box without saying which phones can actually reach it. You should know exactly what you're getting before you buy.
A Magnetic Snap That Lines Itself Up
Wireless charging works best when the coil in the charger sits directly over the coil in your phone. Standard flat pads leave that to chance, so a phone nudged an inch to the side can charge slowly or stop altogether. The magnets in the AXYON charger pull it into the right spot every time. Pick your phone up to answer a message, put it back, and it clicks straight back into place.
It charges through most thin magnetic cases. Thick cases, metal plates, pop-out grips and cards stored between the phone and the charger will block or slow wireless charging. Take them off before charging, and never charge with a bank or transport card in between.
Cooler Pad, Smarter Connector
Heat is what slows wireless charging down. When a phone gets warm, it cuts its own charging speed to protect the battery. The AXYON charger places its charging circuitry in the USB-C connector at the other end of the cable, so the pad that touches your phone is kept free of the main heat-producing parts. It also has built-in protection against over-current, over-voltage, over-temperature and short circuits, to protect both your phone and the charger.
Built for Everyday Use
The 1m cable is braided and permanently attached, so there's no loose cable to lose and no weak joint at the pad. The slim round design sits neatly on a bedside table, desk or car console, and is light enough to pack in any bag.
Why a 2-Pack?
One charger covers one spot. The 2-pack gives you a magnetic charger at the bedside and another at your desk, or one for you and one for someone else in the house, for less than the price of buying two singles.
Key Features
- Qi2.2 Certified, Up to 25W: Officially certified to the latest wireless charging standard (Qi ID 26279). Full 25W on the iPhone 16, iPhone 17 and iPhone 18 Pro series with a 30W+ USB-C PD adapter. Earlier magnetic iPhones charge at their own highest supported wireless speed.
- Self-Aligning Magnetic Snap: The charger lines itself up with your phone's charging coil every time, with no guesswork and no slow charging from a misplaced phone.
- Charging Electronics in the Connector: The circuitry sits in the USB-C connector rather than the pad, keeping heat away from the surface that touches your phone.
- Built-In Protection: Protects against over-current, over-voltage, over-temperature and short circuits.
- 1m Braided USB-C Cable: Permanently attached, flexible and made for daily use.
- Black or White, Single or 2-Pack: Pick the colour that suits your space, or take the 2-pack and have a charger in two places.
- 12-Month AXYON Warranty: Support from Sydney, from an Australian-registered brand.
Technical Specifications
| Specification | Detail |
|---|---|
| Wireless Standard | Qi2.2 certified, 25W (Qi ID 26279) |
| Wireless Output | 5W / 7.5W / 10W / 15W / 25W (automatically matched to your device) |
| Input | USB-C: 5V⎓3A, 9V⎓3A, 12V⎓3A, 20V⎓2A |
| Recommended Wall Adapter | USB-C PD, 30W or higher, for full 25W output (not included) |
| Attachment | Magnetic alignment |
| Cable | 1m braided, permanently attached, USB-C connector |
| Protection | Over-current, over-voltage, over-temperature and short-circuit protection |
| Colours | Black, White |
| In the Box | 1-Pack: 1 × AXYON 25W Qi2.2 Magnetic Wireless Charger with attached 1m cable 2-Pack: 2 × AXYON 25W Qi2.2 Magnetic Wireless Charger, each with attached 1m cable |
| Warranty | 12-month AXYON warranty with local Australian support |
| Brand | AXYON (Connextronix Pty Ltd), Australian-registered |
Compatibility
- iPhone 18 Pro and iPhone 18 Pro Max: magnetic charging at up to 25W with a 30W+ USB-C PD adapter
- iPhone 16 and iPhone 17 series (including Pro and Pro Max): magnetic charging at up to 25W with a 30W+ USB-C PD adapter
- iPhone Air: magnetic charging at up to 20W, the phone's own maximum
- iPhone 17e: magnetic charging at up to 15W, the phone's own maximum
- iPhone 12, 13, 14 and 15 series: magnetic charging at the phone's own highest supported wireless speed
- iPhone 16e: charges wirelessly, but has no built-in magnets, so use a magnetic case to hold it in place
- AirPods and earbuds with a wireless charging case
- Android phones with Qi wireless charging: charge at the phone's own supported wireless speed. Phones without built-in magnets need a magnetic case or ring to snap on.
Not designed for Apple Watch, which uses its own dedicated charger. See the AXYON Apple Watch charging range instead.
Complete the Setup
The wall adapter isn't included. For full 25W charging on an iPhone 16, 17 or 18 Pro, pair this charger with the AXYON 30W USB-C PD Fast Wall Charger, a single-port adapter with an AU plug that gives the charger all the power it needs to deliver its 25W output.
AXYON is an Australian-registered accessories brand operated by Connextronix Pty Ltd, Sydney. Wall adapter and phone not included. Charging speed depends on your phone model, case, power adapter and phone temperature.