AXYON® Garmin Venu 4 45mm Case & Screen Protector | Full Coverage
AXYON® Garmin Venu 4 45mm Case & Screen Protector
Your Venu 4 is a A$949 watch with a stainless steel bezel and a 1.4″ AMOLED display, and both of them sit right at the front of every doorframe, benchtop and rock you walk past. This one-piece AXYON® shell wraps the bezel and the screen edge together, snaps on in seconds, and comes off just as easily.
Why this one
- Built for the Venu 4 45mm — and nothing else. Moulded around the Venu 4’s two-button body, not adapted from an older three-button model. One size on the listing means one size in the box.
- Case and screen cover in a single piece. No adhesive, no alignment tray, no trapped bubbles, no lifting edge, and nothing bonded together that can come apart later.
- Flexible TPU. Stretches over the case, then holds its shape around the bezel and the screen edge — the two most exposed surfaces on the watch.
- A film only covers the glass. It leaves the steel bezel bare. This covers both.
- Full touch and swipe through the cover. Taps, gestures and the on-screen keyboard work as normal.
- Open caseback. The optical sensor array and the charging contacts stay uncovered, so the watch charges and tracks with the case on.
- Keeps your band. The case sits on the watch body and clears the quick-release pins.
- Two finishes. Black for a blacked-out look. Clear to keep the original watch finish on show.
- Held and dispatched in Sydney by Connextronix Pty Ltd, with your full rights under the Australian Consumer Law.
Fits
Garmin Venu 4 — 45mm case size only.
It does not fit the Venu 4 41mm, Venu 3, Venu 3S, Venu 2, Venu 2S, Venu 2 Plus, Venu Sq, Vivoactive or Forerunner models. Your case size is printed on the back of the watch — check it before you order.
Specifications
| Compatibility | Garmin Venu 4, 45mm case size |
| Construction | One-piece shell with integrated screen cover |
| Material | Thermoplastic polyurethane (TPU) |
| Coverage | Bezel, side walls and full screen face |
| Cut-outs | Two side buttons; open caseback |
| Touchscreen | Fully operational through the cover |
| Installation | Snap-on, tool-free, removable and refittable |
| Finishes | Black, Clear |
| Brand | AXYON®, a brand of Connextronix Pty Ltd |
In the box
1 × AXYON® Garmin Venu 4 45mm case with integrated screen cover.
Fitting it
- Wipe the watch face and bezel with a dry, lint-free cloth.
- Line the case up so the two cut-outs sit over the side buttons.
- Press the opposite edge down first, then work around the rim with your thumb.
- Run a finger right around the bezel to confirm the rim is seated.
To remove, lift one edge at the lug and peel it away.
Looking after it
Rinse with fresh water after saltwater or heavy sweat and dry before refitting. Avoid solvents, alcohol wipes and abrasive cleaners on the screen cover. This is a protective accessory, not a sealing product — it does not change your watch’s own water rating.
Questions we get asked
Does the touchscreen still work?
Yes. Taps, swipes and the on-screen keyboard work through the cover.
Will it fit my Venu 4 41mm?
No. This is the 45mm case size only. The 41mm is a different mould.
Do I have to change my band?
No. The case clears the quick-release pins, so your existing band stays on.
Can I charge the watch with it fitted?
Yes. The caseback is open, so the charger clips straight on.
Black or Clear?
Black gives the watch a uniform blacked-out look and hides marks. Clear keeps the original bezel finish visible.
Can I take it off again?
Yes. There is no adhesive anywhere on it — it lifts off and refits.
Garmin® and Venu® are trademarks of Garmin Ltd. AXYON® is a brand of Connextronix Pty Ltd and is not affiliated with, endorsed by or sponsored by Garmin Ltd. Model names are used to describe compatibility only. Watch and band shown for fit reference and are not included.
